Mydas 2 repair2018-10-02T21:54:46+00:00
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Tim Suleymanov
    Keymaster
    Post count: 2

    Does any one ever succeeded repairing Mydas 2 head? Have an issue with Theta “Theta cable error”. Looking for motor replacement alternatives. Looks like something proprietary from Mydata to Maxon

    Tim Suleymanov
    Keymaster
    Post count: 2

    Whoever is interested in repairing this issue, we found that flex cable that goes from Theta motor to little control board had lose connection in connector on top. Looks like design problem where opening of the connector is much bigger than flex cable width and can be easily misaligned when inserted. After re install of the cable all working good. In order to fix this you need to dismount Midas 2 head and then recalibrate.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.